What To Pay Attention To When Starting A Rotary Drilling Rig in Summer And Winter

Rotary drilling rigs are powerful tools in construction projects. However, if not started properly in different seasons, it may affect the performance of the equipment or even cause damage. The significant temperature differences between summer and winter have different requirements for starting a rotary drilling rig. Let's take a look at the key points to pay attention to.

1. Pre-start inspection in summer: Before starting, it is essential to check the coolant level as it tends to evaporate in high temperatures. Also, check the temperature of the hydraulic oil. If it is too high, cool it down first to prevent the equipment from "overheating".

2. Lubrication and heat dissipation in summer: Timely replace the summer-specific grease to ensure smooth operation of the components. Also, clean the dust from the radiator to ensure good heat dissipation and prevent the engine from overheating.

3. Preheating in winter: Before starting in winter, preheat the engine by idling or using a preheating device to allow the oil to fully lubricate all components and reduce wear.

4. Fuel and antifreeze in winter: Replace the fuel suitable for low temperatures to prevent waxing. Check the freezing point of the antifreeze to ensure it does not freeze at the local minimum temperature and protect the cooling system.

5. Standard operation during startup: Regardless of the season, do not immediately operate at high loads after starting. Let the equipment idle at low speed for a few minutes until all systems reach a normal working state.

6. Dealing with special weather conditions: In summer, avoid starting in open areas during thunderstorms. In winter, remove the snow and ice from the equipment to prevent operational and equipment safety issues.

Starting a rotary drilling rig in summer and winter requires extra attention and thorough checks. Paying attention to these details not only extends the equipment's lifespan but also ensures construction safety and efficiency. Only by preparing according to the characteristics of each season can the rotary drilling rig perform optimally in different environments.