What Maintenance Measures Should Be Taken for Small Rotary Drilling RIGS To Reduce Fuel Consumption

For friends who operate small rotary drilling RIGS, high fuel consumption has always been a headache. In fact, proper daily maintenance can effectively reduce fuel consumption. Here are 6 key maintenance points to help you save a lot on fuel!

1. Regularly replace the air filter: A clogged air filter will cause poor air intake in the engine, incomplete combustion, and naturally increase fuel consumption. It is recommended to check and replace it every 200 hours of operation to ensure smooth air intake.

2. Keep the engine oil clean: If the engine oil gets dirty or has too high viscosity, it will increase the friction between the internal parts of the engine and enhance the running resistance. Change the engine oil regularly in accordance with the maintenance manual to make the engine "work easily".

3. Check the tire pressure: Insufficient tire pressure will increase driving resistance and fuel consumption will also rise accordingly. Check the tire pressure at least once a week to ensure that the tires are in normal working condition.

4. Adjust the hydraulic system in a timely manner: Leakage or unstable pressure in the hydraulic system can lead to energy loss. Regularly check the sealing performance of the hydraulic pipeline, calibrate the pressure parameters, and improve work efficiency.

5. Clean the radiator: Excessive dust accumulation in the radiator will affect the heat dissipation effect, and the engine will consume more fuel to maintain a normal temperature. Clean the radiator once a month to maintain good heat dissipation.

6. Correct operation and preheating: Improper operations such as stepping hard on the accelerator and frequent sudden braking will increase fuel consumption. After starting, preheat at a low speed for 3 to 5 minutes to ensure that all components are fully lubricated, reducing wear and fuel consumption.

By doing all these maintenance work well, not only can the fuel consumption of the small rotary drilling rig be reduced, but also the service life of the machine can be prolonged and the maintenance cost can be lowered. Don't let high fuel consumption become a burden anymore. Start paying attention to equipment maintenance from now on!