Key Points for The Daily Maintenance of Rotary Drilling RIGS

The efficient operation of rotary drilling RIGS cannot do without daily maintenance. Scientific maintenance not only extends the service life of the equipment but also reduces construction delays caused by malfunctions. The following are the core points of daily maintenance:

1.Regularly check the condition of the hydraulic oil: Check the level and cleanliness of the hydraulic oil every week. If the oil is insufficient, replenish it with the same type of oil in time. Replace it immediately if impurities are found. Hydraulic oil contamination will accelerate component wear and directly affect the power output of the drilling rig.

2. Clean the air filter: Clean the air filter every 50 hours of operation. Replace the filter element in time if it is damaged. A clogged air filter can lead to insufficient air intake in the engine, causing problems such as incomplete combustion and reduced power.

3. Lubricate key connection parts: For moving joints such as drill pipes and slewing bearings, apply grease as per the instructions to ensure adequate lubrication. Lack of lubrication will increase the friction loss of components and shorten their service life.

4. Check the braking and running systems: Inspect the brake pedal travel and the tightness of the tracks daily. If the brakes fail or the tracks become loose, make immediate adjustments. Brake failure may cause the equipment to skid, and if the tracks are too loose, they are prone to fall off and cause accidents.

5. Clean the drill tools and the drill bucket: After each operation, clean the residue in the drill bucket, check the wear of the drill teeth, and replace them in time if the wear is severe. Residual soil can corrode the drilling tools, and worn drill teeth will reduce the drilling efficiency.

6. Moisture and dust prevention for electrical systems: Regularly clean the instrument panel and terminal blocks. Check if the circuits are damp after working in rainy weather. Moisture and dust accumulation on electrical components can easily cause short circuits, leading to equipment loss of control or functional failure.

In conclusion, the daily maintenance of rotary drilling RIGS should follow the principle of "regular inspection and timely maintenance". From the hydraulic system to the electrical components, from the core parts to the auxiliary structures, only by comprehensively controlling the maintenance details can the equipment always remain in good condition and provide a guarantee for the construction.