Views: 0 Author: Site Editor Publish Time: 2025-06-20 Origin: Site
Overheating of the hydraulic system can affect the normal operation of the rotary drilling rig and may even cause component damage, shortening the service life of the equipment. Now let me tell you how to prevent the hydraulic system of a rotary drilling rig from getting too hot.
1. Regularly check the hydraulic oil: Observe whether the hydraulic oil has deteriorated or emulsified, and whether the oil quantity is sufficient. Replace or replenish the hydraulic oil that meets the requirements in a timely manner to avoid system overheating due to oil quality issues.
2. Clean the cooling system: Regularly clean the dust and debris on the surface of the hydraulic oil radiator to ensure good heat dissipation effect and allow the hydraulic oil to dissipate heat and cool down in time.
3. Control the working load: Avoid prolonged overloading operation, reasonably arrange the working time of the drilling rig, and ensure that the hydraulic system has sufficient rest and cooling time.
4. Inspect hydraulic components: Pay attention to whether the hydraulic pump, motor, valve and other components are worn or damaged, and repair or replace them in time to prevent system overheating due to component failure.
5. Prevent hydraulic leakage: Regularly inspect the hydraulic pipelines, joints, etc. for any leakage, and promptly address any leakage issues to avoid system pressure loss and overheating caused by leakage.
6. Pay attention to the working environment: When operating in high-temperature conditions, take appropriate cooling measures, such as building sunshades to prevent direct sunlight from reaching the hydraulic system of the drilling rig.
In conclusion, by doing well in all the above aspects and regularly inspecting and maintaining the hydraulic system, it is possible to effectively prevent the hydraulic system of the rotary drilling rig from getting too hot, ensuring the normal operation and service life of the equipment.