How Can The Steel Wire Rope of A Small Rotary Drilling Rig Be Reduced in Wear And Tear

The steel wire rope of a small rotary drilling rig is a key component, and its wear and tear directly affects the safety and efficiency of the equipment's operation. Reducing the wear and tear of steel wire ropes through scientific and reasonable methods can not only extend their service life but also lower maintenance costs. The following are six practical key points:

1. Standardize installation operations: During installation, ensure that the steel wire rope is correctly wound around the drum, neatly arranged without any tangled or biting ropes, to prevent accelerated wear due to improper installation.

2. Control the working load: Strictly adhere to the rated lifting capacity of the equipment, do not operate beyond the load limit, and prevent irreversible damage such as broken wires and deformation of the steel wire rope due to excessive tensile force.

3. Regular lubrication and maintenance: Use special lubricants to apply them all over the steel wire rope at regular intervals to reduce friction between strands and wires, and at the same time form a protective film to prevent rust.

4. Strengthen daily inspections: Before and after each operation, carefully check the steel wire rope for any wear, broken wires or deformation. Address any issues promptly to prevent minor damages from escalating.

5. Pay attention to the usage environment: After working in a damp or corrosive environment, clean the steel wire rope in time. If necessary, take protective measures to prevent erosion by chemical substances.

6. Proper storage and preservation: If the steel wire rope is to be out of use for a long time, remove it and store it properly, keeping it dry and avoiding contact with sharp objects to reduce unnecessary wear and tear.

In conclusion, to reduce the wear and tear of steel wire ropes in small rotary drilling RIGS, efforts should be made in multiple aspects such as installation, operation and maintenance. Combining standardized operation with meticulous maintenance can effectively extend the service life of steel wire ropes, ensure the safe and stable operation of equipment, and provide a safeguard for engineering construction.