Experienced Rotary Drilling Rig Operators Want To Impart Knowledge To Beginners

Novice friends who have just started using rotary drilling RIGS, do you think the operation is complicated and worried about making mistakes? Don't panic! Those experienced masters have accumulated a lot of practical knowledge and would like to share it with you. Mastering these key points can help you avoid many detours and become an expert in drilling rig operation more quickly!

1.Before operation, a "full-body check" must be conducted: Before each start of work, just like inspecting a vehicle before driving, carefully check whether the hydraulic oil, engine oil and coolant of the drilling rig are sufficient, whether the screws are loose, and the degree of wear of the steel wire rope. Don't underestimate these steps. Identifying potential hazards in advance can prevent major problems during construction.

2. Accurate geological judgment is the key: The drilling methods for different geological layers vary greatly. When encountering soft soil layers, the advance speed should be slowed down to prevent hole collapse. When encountering hard rock layers, it is necessary to replace the appropriate drill bit in time and adjust the drilling Angle; otherwise, it is easy to damage the drill bit and the machine.

3. There are tricks to maintaining smooth operation: When operating the handle, do not push or pull it forcefully. Instead, act as gently and smoothly as when driving and stepping on the accelerator. Both the lifting and lowering of the drill must be stable to avoid excessive shaking of the drilling rig. This can not only ensure the construction accuracy but also reduce equipment wear.

4. Don't be lazy in maintenance: Take some time to clean the dirt and dust on the drilling rig after work every day, and regularly add grease to each lubrication point. Equipment is like our partner. Only when you put your heart into it can it have fewer malfunctions and not fail at critical moments.

5. Pay attention to the safety of the surrounding environment: The construction site is complex. During operation, not only should you keep an eye on the drilling holes, but also be aware of whether there are high-voltage lines, buildings or pedestrians around. When lifting drilling tools, it is even more important to ensure that no one is approaching within the radius. Safety always comes first.

6. Make good use of data to assist operations: Modern rotary drilling RIGS are all equipped with electronic monitoring systems. Pay close attention to the data on the display screen, such as engine speed, hydraulic pressure, drilling depth, etc. These data can help you detect abnormalities in time and adjust the operation strategy.

These experiences are all the "valuable insights" summarized by the veteran masters in their actual operations. From inspecting the equipment to safe operation and then to maintenance and upkeep, every link is very important. Novice friends, remember these knowledge points well, practice and think more. Soon you will be able to handle the rotary drilling rig proficiently and be more at ease in your work!